Ori Flow Rotameter, Digital Temperature Scanner, Data Logger, Ori - Flow Rotameter, Level Controller, Digital Temperature Indicator, Glass Tube Rotameter, India

 
Ori - Flow Rotameter

Ori - Flow Rotameter

Ori - Flow Rotameter

Ori - Flow Rotameter

The Ori - flow meter measures flow by inserting an orifice at part of the piping, generating differential pressure before and behind the orifice by means of the flow, and extracting this differential pressure by a suitable method. Differential pressure ( P1-P2) of main orifice and the flow Q have shown in equation given below. The flow is proportional to the square root of the differential pressure.

 





Q : Volumetric flow
C : Flow co-efficient
F  : Cross sectional area of orifice hole 
g  : Acceleration of gravity
P1-P2 : Differential pressure
Y : Specific weight of fluid

The generated differential pressure is sent to a manometer or other differential pressure gauge and a differential flow meter can be formed by attaching a flow scale to this gauge. However, since the flow indication is a square root scale reading is difficult. Moreover, incase of remote transmission it is inconvenient because the evolution operation is performed to obtain linear relation. 
Therefore if a by-pass pipe connecting the before and behind point of the main orifice is installed and the flow is branched to that pipe to overcome these disadvantage, that flow becomes proportional to the differential

 


Installation example when flower meter using orifice ring in horizontal piping


Ori - Flow Meter

Ori Flow Rotameter

   

Capacity guide maximum m3/h of water

   

Ori Flow Rotameter

 
Flow value indicates the maximum flow range which can be measured when water (sp. gravity : 1.0, Viscosity : 1 Cp) is the standard. 
However minimum flow value for diameter ratio m : 0.3
maximum flow value for diameter ratio m : 0.7

 
 

Glass Tube Rotameter Variable Area Flow Meter With mA Transmitter Purge Rotameter Acrylic Body Rotameter  
Ori - Flow Meter Orifice Plate and Assemblies
Pitot Tubes With Differential Pressure Gauge On   Line   Insertion Type. 
Tubular level Indicator Reflex Level Indicator Magnetic Level Indicator Float and Board Type Level Indicator
Float Type Level Switch Magnetic Float Switch Displacer Type Level Switch Conductivity Type Level Controller  
Level Controller Capacitance Type Level Indicator Cum Transmitter Digital Temperature Indicator / Controllers  
Multi Point Indicators / Scanners Microprocessor Based Data Loggers RTD Sensors and Thermocouple Sensors  
Thermo Wells


 
R. No. 1A, Vilas Co-Hsg. Society, Sant Tukaram Path,
Kopri, Thane (E) 400603,Maharashtra, Indi
a

Ph. :
(O)
022-25328223 / 25328224
Telefax :
91-22-25324845

Email : info@spinkcontrolsindia.com
Website : www.spinkcontrols.com

 

Designed & Hosted by : MID   Promoted by : GID